COST 733–WG4: Applications of weather type classifications

Póster elaborado para: Advances in Weather in Circulation Type Classifications & Applications (COST 733 Mid-term Conference) celebrado los días 22-25 de octubre de 2008 en Krakow, Polonia

The diurnal evolution of the urban heat island of Paris: a model-based case study during Summer 2006

The urban heat island (UHI) over Paris during summer 2006 was simulated using the Advanced Regional Prediction System (ARPS) updated with a simple urban parametrization at a horizontal resolution of 1 km. Two integrations were performed, one with the urban land cover of Paris and another in which Paris was replaced by cropland. The focus is on a five-day clear-sky period, for which the UHI intensity reaches its maximum. The diurnal evolution of the UHI intensity was found to be adequately simulated for this five day period. The maximum difference at night in 2 m temperature between urban and rural areas stemming from the urban heating is reproduced with a relative error of less than 10%. The UHI has an ellipsoidal shape and stretches along the prevailing wind direction. The maximum UHI intensity of 6.1 K occurs at 23:00 UTC located 6 km downstream of the city centre and this largely remains during the whole night. An idealized one-column model study demonstrates that the nocturnal differential sensible heat flux, even though much smaller than its daytime value, is mainly responsible for the maximum UHI intensity. The reason for this nighttime maximum is that additional heat is only affecting a shallow layer of 150 m. An air uplift is explained by the synoptic east wind and a ramp upwind of the city centre, which leads to a considerable nocturnal adiabatic cooling over cropland. The idealized study demonstrates that the reduced vertical adiabatic cooling over the city compared to cropland induces an additional UHI build-up of 25%. The UHI and its vertical extent is affected by the boundary-layer stability, nocturnal low-level jet as well as radiative cooling. Therefore, improvements of representing these boundary-layer features in atmospheric models are important for UHI studies

The Air-temperature Response to Green/blue-infrastructure Evaluation Tool (TARGET v1.0) : an efficient and user-friendly model of city cooling

The adverse impacts of urban heat and global climate change are leading policymakers to consider green and blue infrastructure (GBI) for heat mitigation benefits. Though many models exist to evaluate the cooling impacts of GBI, their complexity and computational demand leaves most of them largely inaccessible to those without specialist expertise and computing facilities. Here a new model called The Air-temperature Response to Green/blue-infrastructure Evaluation Tool (TARGET) is presented. TARGET is designed to be efficient and easy to use, with fewer user-defined parameters and less model input data required than other urban climate models. TARGET can be used to model average street-level air temperature at canyon-to-block scales (e.g. 100 m resolution), meaning it can be used to assess temperature impacts of suburb-to-city-scale GBI proposals. The model aims to balance realistic representation of physical processes and computation efficiency. An evaluation against two different datasets shows that TARGET can reproduce the magnitude and patterns of both air temperature and surface temperature within suburban environments. To demonstrate the utility of the model for planners and policymakers, the results from two precinct-scale heat mitigation scenarios are presented. TARGET is available to the public, and ongoing development, including a graphical user interface, is planned for future work

A new regional climate model for POLAR-CORDEX : evaluation of a 30-year hindcast with COSMO-CLM2 over Antarctica

Continent-wide climate information over the Antarctic Ice Sheet (AIS) is important to obtain accurate information of present climate and reduce uncertainties of the ice sheet mass balance response and resulting global sea level rise to future climate change. In this study, the COSMO-CLM2 Regional Climate Model is applied over the AIS and adapted for the specific meteorological and climatological conditions of the region. A 30-year hindcast was performed and evaluated against observational records consisting of long-term ground-based meteorological observations, automatic weather stations, radiosoundings, satellite records, stake measurements and ice cores. Reasonable agreement regarding the surface and upper-air climate is achieved by the COSMO-CLM2 model, comparable to the performance of other state-of-the-art climate models over the AIS. Meteorological variability of the surface climate is adequately simulated, and biases in the radiation and surface mass balance are small. The presented model therefore contributes as a new member to the COordinated Regional Downscaling EXperiment project over the AIS (POLAR-CORDEX) and the CORDEX-CORE initiative

Sentinel-1 detects firn aquifers in the Greenland ice sheet

Firn aquifers in Greenland store liquid water within the upper ice sheet and impact the hydrological system. Their location and area have been estimated with airborne radar sounder surveys (Operation IceBridge, OIB). However, the OIB coverage is limited to narrow flight lines, offering an incomplete view. Here, we show the ability of satellite radar measurements from Sentinel-1 to map firn aquifers across all of Greenland at 1 km(2) resolution. The detection of aquifers relies on a delay in the freezing of meltwater within the firn above the water table, causing a distinctive pattern in the radar backscatter. The Sentinel-1 aquifer locations are in very good agreement with those detected along the OIB flight lines (Cohen's kappa = 0.84). The total aquifer area is estimated at 54,800 km(2). With continuity of Sentinel-1 ensured until 2030, our study lays a foundation for monitoring the future response of firn aquifers to climate change

The urban land use in the COSMO-CLM model: A comparison of three parameterizations for Berlin

The regional non-hydrostatic climate model COSMO-CLM is increasingly being used on fine spatial scales of 1–5 km. Such applications require a detailed differentiation between the parameterization for natural and urban land uses. Since 2010, three parameterizations for urban land use have been incorporated into COSMO-CLM. These parameterizations vary in their complexity, required city parameters and their computational cost. We perform model simulations with the COSMO-CLM coupled to these three parameterizations for urban land in the same model domain of Berlin on a 1-km grid and compare results with available temperature observations. While all models capture the urban heat island, they differ in spatial detail, magnitude and the diurnal variation

COST 733 - WG4: Applications of weather type classification

The main objective of the COST Action 733 is to achieve a general numerical method for assessing, comparing and classifying typical weather situations in the European regions. To accomplish this goal, different workgroups are established, each with their specific aims: WG1: Existing methods and applications (finished); WG2: Implementation and development of weather types classification methods; WG3: Comparison of selected weather types classifications; WG4: Testing methods for various applications. The main task of Workgroup 4 (WG4) in COST 733 implies the testing of the selected weather type methods for various classifications. In more detail, WG4 focuses on the following topics:• Selection of dedicated applications (using results from WG1), • Performance of the selected applications using available weather types provided by WG2, • Intercomparison of the application results as a results of different methods • Final assessment of the results and uncertainties, • Presentation and release of results to the other WGs and external interested • Recommend specifications for a new (common) method WG2 Introduction In order to address these specific aims, various applications are selected and WG4 is divided in subgroups accordingly: 1.Air quality 2. Hydrology (& Climatological mapping) 3. Forest fires 4. Climate change and variability 5. Risks and hazards Simultaneously, the special attention is paid to the several wide topics concerning some other COST Actions such as: phenology (COST725), biometeorology (COST730), agriculture (COST 734) and mesoscale modelling and air pollution (COST728). Sub-groups are established to find advantages and disadvantages of different classification methods for different applications. Focus is given to data requirements, spatial and temporal scale, domain area, specifi

Can we use local climate zones for predicting malaria prevalence across sub-Saharan African cities?

Malaria burden is increasing in sub-Saharan cities because of rapid and uncontrolled urbanization. Yet very few studies have studied the interactions between urban environments and malaria. Additionally, no standardized urban land-use/land-cover has been defined for urban malaria studies. Here, we demonstrate the potential of local climate zones (LCZs) for modeling malaria prevalence rate (PfPR2-10) and studying malaria prevalence in urban settings across nine sub-Saharan African cities. Using a random forest classification algorithm over a set of 365 malaria surveys we: (i) identify a suitable set of covariates derived from open-source earth observations; and (ii) depict the best buffer size at which to aggregate them for modeling PfPR2-10. Our results demonstrate that geographical models can learn from LCZ over a set of cities and be transferred over a city of choice that has few or no malaria surveys. In particular, we find that urban areas systematically have lower PfPR2-10 (5%-30%) than rural areas (15%-40%). The PfPR2-10 urban-to-rural gradient is dependent on the climatic environment in which the city is located. Further, LCZs show that more open urban environments located close to wetlands have higher PfPR2-10. Informal settlements - represented by the LCZ 7 (lightweight lowrise) - have higher malaria prevalence than other densely built-up residential areas with a mean prevalence of 11.11%. Overall, we suggest the applicability of LCZs for more exploratory modeling in urban malaria studies. © 2020 The Author(s). Published by IOP Publishing Ltd.info:eu-repo/semantics/publishe

Searching for optimal variables in real multivariate stochastic data

By implementing a recent technique for the determination of stochastic eigendirections of two coupled stochastic variables, we investigate the evolution of fluctuations of NO2 concentrations at two monitoring stations in the city of Lisbon, Portugal. We analyze the stochastic part of the measurements recorded at the monitoring stations by means of a method where the two concentrations are considered as stochastic variables evolving according to a system of coupled stochastic differential equations. Analysis of their structure allows for transforming the set of measured variables to a set of derived variables, one of them with reduced stochasticity. For the specific case of NO2 concentration measures, the set of derived variables are well approximated by a global rotation of the original set of measured variables. We conclude that the stochastic sources at each station are independent from each other and typically have amplitudes of the order of the deterministic contributions. Such findings show significant limitations when predicting such quantities. Still, we briefly discuss how predictive power can be increased in general in the light of our methods